M6 DIN 127B Regular Split Lockwasher Medium Carbon Steel Yellow Zinc Plated

PRODUCT SPECIFICATIONS (Part # 0000-248752)
Fastener Type:	Regular Split Lockwasher
Size Description:	M6
Diameter/Nominal Size:	M6*
System of Measurement:	Metric
Property Class:	200HV
Material:	Medium Carbon Steel
Finish:	Yellow Zinc Plated
Standards Met:	DIN 127B
Used with:	Bolts/Screws up to Class 12.9
Average Piece Weight:	0.0018300 lbs.

*Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit). Actual inside diameter is almost always larger than stated size. Please see the Inside Diameter spec in the table above, if available.

Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the washer. Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc.