PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot.
| PRODUCT SPECIFICATIONS (Part # 0000-210288) | |
|---|---|
| Fastener Type: | Self Drilling Screw Phillips Flat Head Undercut |
| Size Description: | #10-24 x 1" (FT) |
| Diameter/Nominal Size: | #10 |
| Length: | 1" |
| Wrench Size/Across Flats: | PH#2 |
| Head Diameter: | 0.333-0.362" |
| Head Height: | 0.098-0.116" |
| Point Length: | 0.235" |
| Thread Pitch: | 24 |
| Thread Pitch Type: | Coarse |
| Thread Direction: | Right |
| Thread Coverage: | Full |
| System of Measurement: | Inch |
| Material: | Low Carbon Steel |
| Finish: | Zinc Plated |
| Head Type: | Flat Undercut |
| Drive Type: | Phillips |
| Average Piece Weight: | 0.0055830 lbs. |
